Department of Materials & Testing

The Department of Materials and Testing is committed to provide full support to the undergraduate and postgraduate students of the University for gaining in-depth knowledge of conventional and high performance textile materials, the methods to evaluate their physical and chemical properties to ensure quality of intermediate and end products in textile processes. In totality, it endeavours to make it a center of excellence for textile related research and development.

Department of Polymer Engineering offers following degree programs.

  1. BS Textile Technology
  2. MS Advanced Material Engineering

 

1

Hafsa Jamshaid,Rajesh Mishra,Sajid Hussain, "Basalt Hybrid Woven Textile Materials for Advanced Thermal Applications", Indian journal of Fiber & Textile Research, Vol. , No. , (2019), pp.

2

Ali Afzal, Omar Harzallah, Jean Yves Drean, Niaz Ahmad Akhtar, Sheraz Ahmad, "Performance characterization of multifunctional different cross-sectional shaped coaxial composite filaments for SMART textile applications", Journal of Industrial Textiles, Vol. 48, No. 06, (2019), pp.06

3

BILAL ZAHID, HAFSA JAMSHAID, ABDUL WAQAR RAJPUT,MOHAMAD FAIZUL YAHYA, SHAKEEL KHATRI, "Effect of cell size on tensile strength and elongation properties of honeycomb weave", industria textila, Vol. 70, No. , (2019), pp.

4

Zuhaib Ahmad and Brigita Kolčavová Sirková, "Modelling of multifilament woven fabric structure using Fourier series", The Journal of The Textile Institute, Vol. , No. , (2019), pp.

5

Zuhaib Ahmad and Brigita Kolčavová Sirková, "Analysis of mutual interlacing of threads in multifilament single layer and two layer woven fabric structure using Fourier series", The Journal of The Textile Institute, Vol. , No. , (2019), pp.

6

Abdelhamid R.R. Aboalasaad, Brigita Kolčavová Sirková and Zuhaib Ahmad, "Influence of Tensile Stress on Woven Compression Bandage Structure and Porosity", AUTEX Research Journal, Vol. , No. , (2019), pp.

7

Hafiz Shehbaz Ahmad, Hafsa Jamshaid, "Development of thermo-physiologically Comfortable Knit Structure for Sports Application", Tekstil Ve Konfeksiyon, Vol. 29, No. 2, (2019), pp.2

8

Rashid Masood, Hafsa Jamshaid , Muhammad Anam Khubaib, "Development of knitted vest fabrics for human body thermoregulation", Journal of Thermal Analysis and Calorimetry, Vol. , No. , (2019), pp.

9

Muhammad Irfan Siyal, Chang-Kyu Lee, Chansoo Park, Aftab Ahmad Khan and Jong-Oh Kim, "A review of membrane development in membrane distillation for emulsified industrial or shale gas wastewater treatments with feed containing hybrid impurities", Journal of Environmental Management, Vol. 243, No. 1 August 2019, (2019), pp.1 August 2019

10

Aftab Ahmad Khan, Muhammad Irfan Siyal, Chang-Kyu Lee, Chansoo Park, Jong-Oh Kim, "Hybrid organic-inorganic functionalized polyethersulfone membrane for hyper-saline feed with humic acid in direct contact membrane distillation", Separation and Purification Technology, Vol. 210, No. 8 February 2019, (2019), pp. 8 February 2019

11

Aftab Ahmad Khan, Imtiaz Afzal Khan, Muhammad Irfan Siyal, Chang-Kyu Lee, Jong-Oh Kim, "Optimization of membrane modification using SiO2 for robust anti-fouling performance with calcium-humic acid feed in membrane distillation", Environmental research, Vol. 170, No. March 2019, (2019), pp.March 2019

12

Abdul Waqar Rajput, Bilal Zahid, Hafsa Jamshaid, Usman Ali, Amir Abbas, Raja Fahad Qureshi, "Application of Taguchi method to investigate the effect of temperature, heating time, concentration and particle size on improved gel spinning process of UHMWPE", industria textila, Vol. NR 5, No. , (2018), pp.

13

Muhammad Tayyab Nomana,, Jakub Wienera, Jana Saskovaa, Muhammad Azeem Ashraf,Martina Vikova, Hafsa Jamshaid , Pavel Kejzlar, "In-situ development of highly photocatalytic multifunctional nanocomposites by ultrasonic acoustic method", Ultrasonics - Sonochemistry , Vol. 40, No. , (2018), pp.

14

Muhammad Tayyab Noman Jiri Militky , Jakub Wiener , Jana Saskova , Muhammad Azeem Ashraf, Hafsa Jamshaid , Musaddaq Azeem , "Sonochemical synthesis of highly crystalline photocatalyst for industrial applications", Ultrasonics, Vol. 83, No. 7, (2018), pp.7

15

Musaddaq Azeem, Zuhaib Ahmad, Jakub Wiener, Ahmad Fraz, Hafiz Faisal Siddique, Antonin Havalka, "Influence of Weave Design and Yarn Types on Mechanical and Surface Properties of Woven Fabric", FIBRES & TEXTILES in Eastern Europe, Vol. 127, No. 1, (2018), pp.1

16

Muhammad Tayyab Noman, Muhammad Azeem Ashraf, Hafsa Jamshaid, and Azam Ali, "A Novel Green Stabilization of TiO2 Nanoparticles onto Cotton”, Fibers and Polymers", Fibers and Polymers, Vol. 19, No. 11, (2018), pp.11

17

Waseem Ibrahim, Zahid Sarwar, Asfandyar Khan, Ali Hassan, Abdul Azeem,Ahsan Nazir, Hafsa Jamshaid & Uzair Hussain, "A novel study of comparison properties of pigment and reactive dye printed cotton fabric", Journal of Natural Fibers , Vol. , No. , (2018), pp.

18

Hafsa Jamshaid,Rajesh Mishra,jiri Milikitky,Tanveer Hussain, "Analysis of Basalt and Thermoplastic Hybrid composites", Journal of Fibre Bioengineering and Informatics , Vol. , No. , (2018), pp.

19

Zuhaib Ahmad, Moaz Eldeeb, Shoaib Iqbal, Adnan Mazari , "Effect of yarn structure on cover factor in woven fabrics", Industria Textila, Vol. 69, No. 3, (2018), pp.3

20

Zuhaib Ahmad, Brigita Kolčavova Sirkova, Sheraz Ahmad, Muhammad Salman Naeem, Syed Zameer Hassan, "Effect of material and stitching on tensile properties of woven fabrics", IOP Conference Series: Materials Science and Engineering, Vol. 414, No. 1, (2018), pp.1

21

Muhammad Salman Naeem, Syed Zameer Hassan, Zafar Javed, Babar Ramzan, Abher Rasheed, Zuhaib Ahmad, Saima Javed, "Electromagnetic shielding effectiveness of high loft activated carbon web prepared by using acrylic waste", IOP Conference Series: Materials Science and Engineering, Vol. 414, No. 1, (2018), pp.1

22

Khurram Shahzad, Ali Afzal, Zahid Sarwar, Kashif Iqbal, Sheraz Ahmad, "Investigation of manufacturing and processing techniques on shade variation and performance characteristics of woven fabrics", Journal of Engineered Fibers and Fabrics, Vol. 13, No. 03, (2018), pp.03

23

Khubab Shaker, Muhammad Umair, Madeha Jabbar, Danish Mahmood Baitab, Yasir Nawab, Ali Afzal, Sheraz Ahmad, "Effect of fabric structural design on the thermal properties of woven fabrics", Thermal Science, Vol. Online 18 February 2018, No. 10.2298/TSCI170707003S , (2018), pp.10.2298/TSCI170707003S

24

Abdul Moqeet, Mehboob Ahmed, Ali Afzal, Abdul Jabbar, Sajid Faheem, "Characterization and antibacterial property of Kapok fibres treated with chitosan/AgCl - TiO2 Colloid", Journal of The Textile Institute, Vol. Online 26 April 2018, No. 10.1080/00405000.2018.1466629 , (2018), pp.10.1080/00405000.2018.1466629

25

Abdul Basit, Wasif Latif, Sajjad Ahmad Baig, Ali Afzal, "The Mechanical and Comfort Properties of Sustainable Blended Fabrics of Bamboo With Cotton and Regenerated Fibers", Clothing and Textiles Research Journal, Vol. 36, No. 04, (2018), pp.04

26

Amir Shahzad, Naseer Ahmad, Zulfiqar Ali, Ali Afzal, Muhammad Bilal Qadir, Zubair Khaliq, Muhammad Qamar Khan, "Statistical analysis of yarn to metal frictional coefficient of cotton spun yarn using Taguchi design of experiment", Journal of Strain Analysis for Engineering Design, Vol. 53, No. 07, (2018), pp.07

27

Babar Ramzan, Abher Rasheed, Zulfiqar Ali, Sheraz Ahmad, Muhammad Salman Naeem, Ali Afzal, "Impact of wash types and stitching parameters on shrinkage of knitwear made from pique fabric", International Journal of Clothing Science and Technology, Vol. Online 12 December 2018, No. 10.1108/IJCST-04-2018-0057 , (2018), pp.10.1108/IJCST-04-2018-0057

28

Muhammad Irfan Siyal, Aftab Ahmad Khan, Chang-Kyu Lee, Jong-Oh Kim, "Surface modification of glass fiber membranes by fluorographite coating for desalination of concentrated saline water with humic acid in direct-contact membrane distillation", Separation and Purification Technology, Vol. 205, No. October 2018, (2018), pp.October 2018

29

Muhammad Irfan Siyal, and Jong-Oh Kim, "Fluorographite-co-polydimethylsiloxane coated polyvinylidene-fluoride membrane for desalination of highly saline water with humic acid in direct contact membrane distillation", Environmental research, Vol. 167, No. November 2018, (2018), pp.November 2018

30

A. Afzal, S. Ahmad, A. Rasheed, M. Mohsin, F. Ahmad, Y. Nawab, "Characterization and statistical modelling of thermal resistance of cotton/polyester blended double layer interlock knitted fabrics", Thermal Science, Vol. 21, No. 6A, (2017), pp.6A

31

A. Afzal, S. Ahmad, A. Rasheed, F. Ahmad, F. Iftikhar, Y. Nawab, "Influence of fabric parameters on thermal comfort performance of double layer knitted interlock fabrics", AUTEX Research Journal, Vol. 17, No. 1, (2017), pp.1

32

A. Nazir, T. Hussain, A. Afzal, S. Faheem, W. Ibrahim, M. Bilal, "Prediction and correlation of air permeability and light transmission properties of woven cotton fabrics", AUTEX Research Journal, Vol. 17, No. 1, (2017), pp.1

33

A. Afzal, J.Y. Drean, O. Harzallah, N. Khenoussi, S. Ahmad, N.A. Akhtar, "Development of multifunctional different cross-sectional shaped coaxial composite filaments for SMART textile applications", Textile Research Journal, Vol. 87, No. 16, (2017), pp.16

34

Rajesh Mishra, Hafsa Jamshaid, & Jiri Militky, "Basalt nanoparticle reinforced hybrid woven composites: Mechanical and thermo-mechanical performance in Fibers and Polymers", Journal of the Textile Institute, Vol. 18(12), No. , (2017), pp.

35

Hafsa Jamshaid, Rajesh Mishra, Jiř Militk & Muhammad Tayyab Noman, "Interfacial performance and durability of textile reinforced concrete", Journal of the Textile Institute, Vol. , No. , (2017), pp.

36

S. Hussain, V. Glombikova, A. Havelka, H. Jamshaid, S.S. Batool and M.Z. Khan , "Moisture Transport Phenomena of Functional Underwears", Fibers & Textile , Vol. 2, No. , (2017), pp.

37

Hafsa Jamshaid , "Basalt Fiber and its Applications", Textile Engineering & Fashion Technology, Vol. 6, No. , (2017), pp.

38

Rajesh Mishra, Hafsa Jamshaid & Jiri Militky, "Investigation of Mechanical Properties of Basalt Woven Fabrics by Theoretical and Image Analysis Methods", Fiber and Polymers , Vol. 18, No. 7, (2017), pp.7

39

Veera kumar, Rajesh Mishra, Jana Salacova, Mohanapriya Venkatraman, Dana Kremenakova,Jiri Militky , Hafsa Jamshaid , "Functiona; Characteristics evalauation of 3 D dimensional knitted spacer fabrics", Vlakna Textiles , Vol. 1, No. , (2017), pp.

40

Hafsa Jamshaid, Rajesh Mishra, Jiri Militky and Veronika Safarova, "Investigation of electrical properties of basalt and its hybrid structures", Textile Research , Vol. 87, No. 6, (2017), pp.6

41

Zuhaib Ahmad & Brigita Kolčavova Sirkova, "Tensile behavior of Basalt and Glass single layer and multilayer woven fabrics", The Journal of The Textile Institute, Vol. 109, No. 5, (2017), pp.5

42

Shoaib Iqbal, Moaz Eldeeb, Zuhaib Ahmad , Adnan Mazari, "Comparative study on yarn and knitted fabric made from Open end and Rieter airjet spun system", Tekstil ve Konfeksiyon, Vol. 27, No. 3, (2017), pp.3

43

Asif Elahi Mangat, Lubos Hes, Vladimir Bajzik, Zuhaib Ahmad, "Influence of air flow direction on thermal resistance and water vapor permeability of Rib knit fabrics", TEKSTİL ve KONFEKSİYON, Vol. 27, No. 1, (2017), pp.1

44

Sheraz Ahmad, Munir Ashraf, Azam Ali, Khubab Shaker, Muhammad Umair, Ali Afzal, Yasir Nawab, Abher Rasheed, "Preparation of Conductive Polyethylene Terephthalate Yarns by Deposition of Silver and Copper Nanoparticles", Fibres and Textile in Eastern Europe, Vol. 25, No. 5(125), (2017), pp.5(125)

45

Munir Ashraf, Muhammad Irfan Siyal, Ahsan Nazir, Abdur Rehman, "Single-step antimicrobial and moisture management finishing of PC fabric using ZnO nanoparticles", Autex Research Journal, Vol. 17, No. 3, (2017), pp.3

46

Muhammad Irfan Siyal, Chang Kyu Lee, Jong Oh Kim, "Degradation of humic acid by ZVI based sono-fenton as a pretreatment for reducing organic fouling likely in membrane distillation", Desalination and Water Treatment, Vol. 99, No. , (2017), pp.

47

Muhammad Irfan Siyal, Chang Kyu Lee, Aftab Ahmad Khan, Chansoo Park, Jong Oh Kim, "TOC reduction using Fenton and sono-Fenton process as membrane distillation pretreatment", Desalination and Water Treatment, Vol. 77, No. , (2017), pp.

48

Rashid Masood, Azeem Ullah, Tanveer Hussain, Tanzeel Areeb, Muhammad Umar, Zulfiqar Ali Raza and Mohsen Miraftab, "Novel Alginate, Chitosan and Psyllium composite fiber for woundcare applications", Journal of Industrial Textile, Vol. , No. , (2016), pp.

49

Muhammad Maqsood, Muhammad Imran Khan, Khubab Shaker, Muhammad Umair, Yasir Nawab , "Recycling of warp size materials and comparison of yarn mechanical properties sized with recycled materials and virgin materials", Journal of the Textile Institute , Vol. , No. , (2016), pp.

50

Muhammad Umar Nazir, Khubab Shaker, Sheraz Ahmad, Yasir Nawab, Muhammad Umair, Muhammad Maqsood, "Investigating the mechanical behavior of composites made from textile industry waste", Journal of the Textile Institute, Vol. (In Press), No. , (2016), pp.

51

Zulfiqar Ali. Raza, Fiaza Anwar, Sheraz Ahmad, Muhammad Aslam., "Fabrication of ZnO incorporated chitosan nanocomposites for enhanced functional properties of cellulosic fabric", Materials Research Express, Vol. (In Press), No. , (2016), pp.

52

Hafsa Jamshaid, Rajesh Mishra , "A green material from Rock : A basalt fiber", Journal of the Textile Institute, Vol. 107(7), No. , (2016), pp.

53

Hafsa Jamshaid, Rajesh Mishra, Jiri Militky, Miroslava Pechociakova, Muhammad Tayyab Noman, "Mechanical, Thermal and Interfacial Properties of Green Composites from Basalt and Hybrid Woven Fabrics", Fibers and Polymers, Vol. 17( 10), No. , (2016), pp.

54

Hafsa Jamshaid, Rajesh Mishra, Jiri Militky , "Analysis of Mechanical Properties of Basalt hybrid woven fabrics", Journal of Fiber Bioengineering and Informatics , Vol. 9(3), No. , (2016), pp.

55

Hafsa Jamshaid, Rajesh Mishra and Jiri Militky, "Thermo-Mechanical Characteristics of Basalt Hybrid & Non-hybrid Woven Fabric Reinforced Composites", Polymer Composites, Vol. 37(10), No. , (2016), pp.

56

Zuhaib Ahmad, Brigita Kolčavova Sirkova and Moaz Eldeeb, "Yarn cross-sectional deformation in woven fabric", Vlakna a Textil, Vol. 23, No. 4, (2016), pp.4

57

S. Ahmad, A. Rasheed, A. Afzal, F. Ahmad, M. Mohsin, N. A. Akhtar, "Effect of weave structure on thermo-physiological properties of cotton fabrics", AUTEX Research Journal, Vol. 15, No. 01, (2015), pp.01

58

Waqas Ashraf, Yasir Nawab, Muhammad Maqsood, Haritham Khan, Habib Awais, Shahbaz Ahmad, Munir Ashraf, Sheraz Ahmad., "Development of Seersucker Knitted Fabric for Better Comfort Properties and Aesthetic Appearance", Fibres and Polymers , Vol. (In Press), No. , (2015), pp.

59

Muhammad Awais, Muhammad Tausif, Faheem Ahmad, Abdul Jabbar, Sheraz Ahmad, "Inclusion of Recycled PPTA Fibre in Development of Cut-resistant Gloves", Journal of the Textile Institute, Vol. 106, No. 4, (2015), pp.4

60

M. Mohsin, N. Ramzan, S.W. Ahmad, A. Afzal, H. G. Quatab, A. Mehmood, "Development of environment friendly bio cross-linker finishing of silk fabric", Journal of Natural Fibers, Vol. 12, No. 3, (2015), pp.3

61

Muhammad Tausif, Faheem Ahmad, Uzair Hussain, Abdul Basit, Tanveer Hussain , "A comparative study of mechanical and comfort properties of bamboo viscose as an eco-friendly alternative to conventional cotton fibre in polyester blended knitted fabrics", Journal of Cleaner Production, Vol. 89, No. , (2015), pp.

62

Sheraz Ahmad, Faheem Ahmad, Ali Afzal, Abher Rasheed, Muhammad Mohsin , Niaz Ahmad, "Effect of Weave Structure on Thermo-Physlological Properties of cotton fabrics", AUTEX Research Journal, Vol. In Press, No. , (2015), pp.

63

Tanveer Hussain, Azeem Ullah, Muhammad Umar, Tanzeel Areeb, Rashid Masood and Qasim Zia, "Modeling the properties of pigment printed polypropylene nonwoven fabric by Box Behnken (RSM) technique", Coloration Technology, Vol. 137, No. , (2015), pp.

64

Muhammad Maqsood, Tanveer Hussain, Mumtaz Hasan Malik, Yasir Nawab , "Modeling the effect of elastane linear density, fabric thread density, and weave float on the stretch, recovery, and compression properties of bi-stretch woven fabrics for compression garments", Journal of the Textile Institute , Vol. 107, No. 3, (2015), pp.3

65

Muhammad Maqsood, Yasir Nawab, Syed Talha Ali Hamdani, Khubab Shaker, Muhammad Umair, Waqas Ashraf , "Modeling the effect of weave structure and fabric thread density on the barrier effectiveness of woven surgical gowns", Journal of the Textile Institute , Vol. , No. , (2015), pp.

66

Muhammad Maqsood, Yasir Nawab, Khubab Shaker, Muhammad Umair, Munir Ashraf, Danish Mahmood Baitab, Syed Talha Ali Hamdani, Salma Shahid , "Modeling the effect of weave structure and fabric thread density on mechanical and comfort properties of woven fabrics", Autex Research Journal , Vol. , No. , (2015), pp.

67

Waqas Ashraf, Yasir Nawab, Muhammad Maqsood, Haritham Khan, Habib Awais, Shahbaz Ahmad, Munir Ashraf, Sheraz Ahmad , "Development of seersucker knitted fabrics for better comfort properties and aesthetic appearance", Fibers and Polymers , Vol. , No. , (2015), pp.

68

Jawairia Umar, Tanveer Hussain, Muhammad Maqsood, "Modeling the mechanical and compression properties of polyamide/elastane knitted fabrics for compression sportswear ", Journal of the Textile Institute , Vol. , No. , (2015), pp.

69

Syed Talha Ali Hamdani, Anura Fernando, Muhammad Maqsood , "Thermo-mechanical behavior of stainless steel knitted structures", Heat and Mass Transfer Journal, Vol. , No. , (2015), pp.

70

Muhammad Umair, Tanveer Hussain, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, Madeha Jabbar , "Effect of woven fabric structure on the air permeability and moisture management properties", Journal of the Textile Institute , Vol. , No. , (2015), pp.

71

Khubab Shaker, Muhammad Umair, Muhammad Maqsood, Yasir Nawab, Sheraz Ahmed, Abher Rasheed, Munir Ashraf, Abdul Basit , "A statistical approach for obtaining the controlled woven fabric width", Autex Research Journal , Vol. , No. , (2015), pp.

72

Khubab Shaker, Yasir Nawab, Muhammad Usman Javed, Muhammad Umair, Muhammad Maqsood , "Development of 3D woven fabric based pressure switch ", Autex Research Journal , Vol. , No. , (2015), pp.

73

M. Mohsin, N. Sarwar, S. Ahmad, A. Rasheed, F. Ahmad, A. Afzal, S. Zafar, "Maleic acid crosslinking of C-6 fluorocarbon as oil and water repellent finish on cellulosic fabrics", Journal of Cleaner Production, Vol. 112, No. 4, (2015), pp.4

74

Ali Afzal, Sheraz Ahmad, Abher Rasheed, Muhammad Mohsin, Faheem Ahmad, Yasir Nawab, "Characterization and modelling of thermal resistance of Cotton/Polyester Blended Double Layer Interlock Knitted Fabrics", Thermal Science, Vol. (In Press), No. , (2015), pp.

75

Hafsa Jamshaid, Rajesh Mishra, Jiri Militky and Jan Novak, "End use performance characterization of unconventional knitted fabrics", Fibers and Polymers , Vol. 16 (11), No. , (2015), pp.

76

Hafsa Jamshaid, Rajesh Mishra, Jiř Militk, "Thermal and mechanical characterization of novel basalt woven hybrid structures", Journal of the Textile Institute, Vol. 107 (4), No. , (2015), pp.

77

A. Afzal, T. Hussain, H. Malik, Z. Javed, "Statistical model for Predicting the air permeability of Polyester/Cotton blended interlock knitted fabrics", The Journal of The Textile Institute, Vol. 105, No. 02, (2014), pp.02

78

A. Afzal, T. Hussain, M. H. Malik, A. Rasheed, S. Ahmad, A. Basit, A. Nazir, "Investigation and modelling of air permeability of Cotton/Polyester blended double layer interlock knitted fabrics", Fibers and Polymers, Vol. 15, No. 07, (2014), pp.07

79

A. Afzal, T. Hussain, M. Mohsin, A. Rasheed, S. Ahmad, "Statistical models for predicting the thermal resistance of polyester/cotton blended interlock knitted fabrics", International Journal of Thermal Sciences, Vol. 85, No. November, (2014), pp.November

80

M. Mohsin, U. Farooq, Z.A. Raza, M. Ahsan, A. Afzal, A. Nazir, "Performance enhancement of wool fabric with environment friendly bio cross-linker", Journal of Cleaner Production, Vol. 68, No. 01, (2014), pp.01

81

A. Rasheed, S. Ahmad, M. Mohsin, F. Ahmad, A. Afzal, "Geometrical model to calculate the consumption of sewing thread for 301 lock-stitch", The Journal of The Textile Institute, Vol. 105, No. 12, (2014), pp.12

82

Muhammad Mohsin, Umar Farooq, Naveed Ramzan, Abher Rasheed, Sheraz Ahmad, Muhammad Ahsan, "Softener impact on environment friendly low and zero formaldehyde cross-linker performance for cotton", Industria Textila , Vol. 65, No. 3, (2014), pp.3

83

Abher Rasheed, Sheraz Ahmad, Muhammad Mohsin, Faheem Ahmad, Ali Afzal, "Geometrical model to calculate the consumption of sewing thread for 301 lockstitch", Journal of the Textile Institute , Vol. 105, No. 12, (2014), pp.12

84

Ali Afzal, Tanveer Hussain, Mumtaz Hassan Malik, Abher Rasheed, Sheraz Ahmad, Abdul Basit, Ahsan Nazir, "Investigation and modeling of air permeability of Cotton/Polyester blended double layer interlock knitted fabrics", Fibres and Polymers, Vol. 15, No. 7, (2014), pp.7

85

Ahsan Nazir, Tanveer Hussain, Qummer Zia, Muhammad Ali Afzal, "Improving thermo-physiological comfort of polyester/cotton knits by caustic and cellulases treatments", AUTEX Research Journal, Vol. 14, No. 3, (2014), pp.3

86

M Awais, M Tausif, Faheem Ahmad, Abdul Jabbar & Sheraz Ahmad, "Inclusion of recycled PPTA fibre in development of cut resistant gloves", Journal of Textile Institute, Vol. 106, No. 04, (2014), pp.04

87

Ahsan Nazir, Tanveer Hussain, Faheem Ahmad, Sajid Faheem, "Effect of Knitting Parameters on Moisture Management and Air Permeability of Interlock", Autex Research Journal, Vol. 14, No. 1, (2014), pp.1

88

M Bilal Qadir, Tanveer Hussain, Mumtaz Malik, Faheem Ahmad & Sung Hoon Jeo, "Effect of Elastane Denier and Draft Ratio on the Physical and Mechanical Properties of Core-Spun Cotton Yarns", Journal of Textiles Institute, Vol. 105, No. 7, (2014), pp.7

89

Abdul Jabbar, Shakeel Ahmad, Tanveer Hussain, Noman Haleem & Faheem Ahmad , "Statistical model for prediction of air consumption on air jet loom", Journal of Engineered Fibers and Fabrics, Vol. vol. 9, No. 3, (2014), pp.3

90

Muhammad Maqsood, Yasir Nawab, Muhammad Usman Javed, Khubab Shaker, Muhammad Umair , "Development of seersucker fabrics using single beam and modeling of their stretch-recovery behavior", Journal of the Textile Institute , Vol. 106, No. 11, (2014), pp.11

91

Muhammad Maqsood, Tanveer Hussain, Yasir Nawab, Khubab Shaker, Muhammad Umair , "Prediction of warp and weft yarn crimp in cotton woven fabrics", Journal of the Textile Institute , Vol. 106, No. 11, (2014), pp.11

92

Hafsa Jamshaid, Rajesh Mishra, "Photoilluminance of different woven structures by treatment with phosphorescent pigment", Fibers and Polymers, Vol. 15(5), No. , (2014), pp.

93

Hafsa Jamshaid ,Tanveer Hussain, Ateeb Sohail, "Reducing defects in textile weaving by applying Six Sigma methodology: a case study", Int. J. of Six Sigma and Competitive Advantage, Vol. Vol.8, No.2, No. , (2014), pp.

94

Hafsa Jamshaid, Tanveer Hussain, Zulfiqar Ali Malik, " Comparison of regression and adaptive neuro-fuzzy models for predicting the bursting strength of plain knitted fabrics", Fibers and Polymers , Vol. 14(7), No. , (2013), pp.

95

Sheraz Ahmad, Artan Sinoimeri, Shahram Nowrouzieh, "The Effect of the Sliver Fibre Configuration on the Cotton Inter-fibre Frictional Forces", Journal of Engineered Fibre and Fabrics , Vol. 7, No. , (2012), pp.

96

Hafsa Jamshaid/Riaz, "Crisis of Pakistan Textile Industry", Journal of the institute of Engineers, Pakistan, Vol. , No. , (2010), pp.

97

Hafsa Jamshaid/Riaz , "Electronic Textiles and its applications", Pakistan Textile Journal, Vol. , No. , (2009), pp.

98

Hafsa Jamshaid/Riaz , "Engineers, Future of Pakistan", Journal of the Institute of Engineers, Pakistan, Vol. , No. , (2009), pp.

99

Sheraz Ahmad, Iftikhar Ahmad, Sajjad Ahmad Baig , "The Effect of Nipper Guage and Drafting Zone Guages at Combing Machine on Yarn Quality Parameters", Journal of Quality and Technology Management , Vol. IV, No. 1, (2008), pp.1

100

Hafsa Jamshaid/Riaz, "Energy saving and conservation measures", Pakistan Textile Journal, Vol. , No. , (2008), pp.

1

Zuhaib Ahmad, Birgita Kolcavova Sirková, Sheraz Ahmad and M. Salman Naeem, "Application of Fourier series to analyze the deformation of yarn in multifilament double layer woven structures", 5th International Conference on Value Addition & Innovation in Textiles (COVITEX), Venue: National Textile University, Faisalabad, Pakistan, (2019)

2

Muhammad Nauman Hameed, Yasir Nawab, Khubaib Shakir, Muhammad Zubair, Zuhaib Ahmad and M. Salman Naeem, "Effect of structural parameters on the puncture resistance of Kevlar woven fabrics", 5th International Conference on Value Addition & Innovation in Textiles (COVITEX), Venue: National Textile University, Faisalabad, Pakistan, (2019)

3

Hafsa Jamshaid ,Ali Raza, Sikander Abbas Basra, Rajesh Mishra, "Development Of Thermally Insulated Construction Structure By Sustainabe Natural Fibers", 47th Textile research Symposium,, Venue: Czeck Republic, (2019)

4

Hafsa Jamshaid, Uzair Hussain, Haritham Khan, Rajesh Mishra, "Development Of Comfortable Motorcyclist Gloves From Recycled Ppta", Autex, Venue: Ghent, (2019)

5

Hafsa Jamshaid, Zeeshan Azeem, Sikander Abbas Basra,Uzair Hussain1,Rajesh Mishra, " Development Of Shoe Insole With Natural Fibres", 4th ICNF, Venue: Portugal, (2019)

6

M. Salman Naeem, Zafar Javed, Abher Rasheed, Babar Ramzan, Zuhaib Ahmad, Hafiz Affan Abid, "Removal of Acid Red from Aquous Media using Activated Carbon from Acrylic waste", Emerging Trends in Knitting, Venue: National Textile University, Faisalabad, Pakistan, (2018)

7

Zuhaib Ahmad, Brigita Kolcavova Sirkova, Sheraz Ahmad, Muhammad Salman Naeem and Syed Zameer ul Hassan, "Effect of material and stitching on tensile properties of woven fabrics", 1st International Conference on Advances in Engineering and Technology (ICAET 2018), Venue: BUITEMS, Quetta, Pakistan, (2018)

8

Muhammad Salman Naeem, Syed Zameer Ul Hassan, Zafar Zaved, Abher Rasheed, Zuhaib Ahmad, Babar Ramzan, Saima Javed, "Electrical conductivity and EMI shielding application of high loft non-woven web from acrylic fibrous waste", 1st International Conference on Advances in Engineering and Technology (ICAET 2018), Venue: BUITEMS, Quetta, (2018)

9

Zuhaib Ahmad, Birgita Kolcavova Sirkova and A.R.R. Aboalasaad, "Yarn deformation in multifilament single layer woven structures using Fourier series", 18th AUTEX World Textile Conference, Venue: Istanbul, Turkey, (2018)

10

Rajesh Mishra, Hafsa Jamshaid, Mohanapriya Venkataraman, Jiri Militky and Michal Petrů,, "Basalt based Hybrid Fabrics for Composites", IUMRS ICA , Venue: Bali, Indonesia, (2018)

11

Rajesh Mishra, Hafsa Jamshaid, "Hybrid basalt based concrete", conference on Advanced textiles, Venue: Hangzhou, China, (2018)

12

Rajesh Mishra, Hafsa Jamshaid, "Bio-based hybrid composites from basalt", Rajesh Mishra, Hafsa Jamshaid, Venue: Paris, (2018)

13

Hafsa Jamshaid, Uzair Hussain, "Optimization of fire resistant and comfort properties of knitted fabrics", 91st Textile Institute world conference, Venue: UK, (2018)

14

Hafsa Jamshaid, Rajesh Mishra Jiri Militky , "Characteristics of woven Basalt and hybrid structures as composite reinforcement", TBIS, Venue: UK, (2018)

15

Hafsa Jamshaid, "Sustainable Materials for Knitted Composites", International Forum on Knitted Shaping Technology, Venue: China, (2018)

16

Hafsa Jamshaid, "Knitted Application in Technical Textiles", IGATEX, Venue: Pakistan, (2018)

17

Hafsa Jamshaid, Rajesh Mishra Jiri Militky, "Green Material Applications For Future", 1st International Conference on Advances in Engineering and Technology , Venue: Pakistan, (2018)

18

Ali Afzal*, Jean-Yves Drean, Muhammad Bilal Qadir, Ahsan Nazir, Zulfiqar Ali, Zubair Khaliq, "Extrusion die design for composite filament fabrication: Part A", International conference on Innovation and Entrepreneurship in Textiles, Venue: Faisalabad, Pakistan, (2018)

19

Hafsa Jamshaid, Uzair hussain, "Study of Structural Performance and Durability of Textile Reinforced Concrete", International Conference on Technical Textiles (ICTT), Venue: NTU FSD, (2017)

20

Uzair hussain, Hafsa Jamshaid, " Investigation of comfort properties of flame resistant fabrics", International Conference on Technical Textiles (ICTT), Venue: NTU FSD, (2017)

21

Uzair hussain, Hafsa Jamshaid, "Study Of Thermal Comfort Of Single Jersey Fabric By Utilization Of Recycled Wool With Polyester", 9th Central European Conference (Fibre Grade Polymers, Chemical Fibres and Special Textiles), Venue: Liberec,Czech Republic, (2017)

22

Hafsa Jamshaid, Rajesh Mishra , Jiri Militky, "Evaluation of acoustic Characteristics of woven fabrics in relation to fiber and weave", TBIS , Venue: China, (2017)

23

Hafsa Jamshaid, Rajesh Mishra , Jiri Militky, "Flame-resistant pure and hybrid woven fabrics from basalt", Autex ., Venue: Greece, (2017)

24

Muhammad Zubair, Zuhaib Ahmad, Muhammad Usman Javaid, Jean-Yves Drean, Decrette Mathieu, "Influence of fabric architecture and material on physical properties of 3D multilayer woven fabrics", 9th Central European Conference, Venue: Technical University of Liberec, Liberec, Czech Republic, (2017)

25

Ali Afzal*, Jean Yves Drean, Omar Harzallah, Sheraz Ahmad, Niaz Ahmad Akhtar, "Development of core sheath filament for SMART textile applications", Fiber Society’s 2017 Fall Conference, Venue: Athens, Georgia, USA, (2017)

26

Ali Afzal*, Zulfiqar Ali, Bilal Qadir, Amir Shahzad, Abdul Jabbar, Ahsan Nazir, "Development of spinneret design for composite filament fabrication: Part B", 1st International Conference on Technical Textiles, Venue: Faisalabad, Pakistan, (2017)

27

A. Afzal, J.Y. Drean, N. Khenoussi, S. Ahmad, N.A. Akhtar, "Development of composite filament by conventional melt extruder", The Fiber Society Spring 2016 Conference, Venue: Mulhouse, France, (2016)

28

A. Afzal, J.Y. Drean, N. Khenoussi, S. Ahmad, N.A. Akhtar, "Evaluation of dimensional stability in cutting of coaxial composite filaments", 16th AUTEX World Textile Conference, Venue: Ljubljana, Slovenia, (2016)

29

Hafsa Jamshaid, Rajesh Mishra, , Jiř Militk, "Performance Characterization Of Basalt Hybrid Woven Fabric Reinforced Concrete", TUL , Venue: Chezk Republic, (2016)

30

Hafsa Jamshaid, Rajesh Mishra, , Jiř Militk, "Comparative Evaluation of Hybrid Composites", ITC & DC, Venue: Dresden ,Germany, (2016)

31

Hafsa Jamshaid, Rajesh Mishra, , Jiř Militk, Muhammad Tayyab Noman, "Effect Of Basalt Nanoparticles On Mechanical And Thermal Characterization ", Nanocon , Venue: Czech Republic, (2016)

32

Hafsa Jamshaid; Mishra Rajesh & Militky Jiri , "Comparative Evalaution Of Mechanical And Thermal Properties Of Basalt Hybrid And Non Hybrid Fabrics ", 8th International Textile, Clothing & Design Conference - Magic World Of Textiles , Venue: Dubrovnik, Croatia , (2016)

33

Hafsa Jamshaid, Rajesh Mishra , "New Materials:Basalt fiber ", Design & Light Creative workshop, Venue: Liberec,Chezk Republic, (2016)

34

Hafsa Jamshaid , Rajesh Mishra, Jiri Militky , "Characterization Of Mechanical Properties Of Basalt Hybrid Fabrics", TBIS-APCC , Venue: Australia , (2016)

35

Hafsa Jamshaid, Rajesh Mishra,Jiř Militk, "Mechanical & Functional Characterization of Basalt woven structures", Fiber society, Venue: ---, (2016)

36

Hafsa Jamshaid, Rajesh Mishra , "Characteristics Of Woven Basalt Hybrid Composites", Textile Institute conference , Venue: ---, (2016)

37

Hafsa Jamshaid, Rajesh Mishra, Jiř Militk , "Investigation of Thermal Properties of Hybrid Structures", ISERD conference , Venue: ---, (2016)

38

Salman Naeem, Saima Javed,Vijay Baheti, Jiri Militky, Zuhaib Ahmad, Promoda Behera, "Effect of temperature, heating rate and holding time on the properties of Carbon web made from acrylic waste", STRUTEX, Venue: Technical University of Liberec, Liberec, Czech Republic, (2016)

39

A. Afzal, J.Y. Drean, N. Khenoussi, N.A. Akhtar, S. Ahmad, "Influence of drawing parameter on the development of composite polymeric technical filaments", 3rd International Conference on Value Addition and Innovation in Textile COVITEX 2015, Venue: Faisalabad, Pakistan, (2015)

40

Rabia Riaz, Rashid Masood, Tanveer Hussain, Zulfiqar Ali Raza, Azeemullah, Tanzeel Areeb, Zakariya Zubair and Muhammad Umar, "Influence of Hydrolyzed Chitosan Concentration on Linear Density and Tensile Properties of Psyllium, Alginate and Chitosan Composite Fiber", 3rd International Conference on Value Addition & Innovation in Textiles COVITEX, 2015, Venue: National Textile University, Faisalabad, Pakistan, (2015)

41

Zarqa Shahzadi, Rashid Masood, Tanveer Hussain, Zulfiqar Ali Raza, Niaz Ahmad and Azeemullah, "Effect of drawing ratio on the liquid absorption, swelling and tensile properties of alginate fibre used in wound care", 3rd International Conference on Value Addition & Innovation in Textiles COVITEX, 2015, Venue: National Textile University, Faisalabad, (2015)

42

Faheem Ahmad, Muhammad Tausif, Mumtaz H Malik, Tanveer Hussain, Ali Afzal, "Effect of key process variables of hydroentanglement on mechanical and comfort properties of nonwoven fabrics.", AUTEX 2015 15th World Textile Conference, Venue: Bucharest, Romania, (2015)

43

A. Afzal, J.Y. Drean, N. Khenoussi, S. Ahmad, N.A. Akhtar, "Influence of spinneret parameter on the development of composite polymeric technical filaments", 15th AUTEX World Textile Conference, Venue: Bucharest, Romania, (2015)

44

F. Ahmad, M. Tausif, M.H. Malik, T. Hussain, A. Afzal, "Effect of key process variables of hydro entanglement on mechanical and comfort properties of nonwoven fabrics", 15th AUTEX World Textile Conference, Venue: Bucharest, Romania, (2015)

45

Muhammad Umar, Rashid Masood, Tanveer Hussain, Qasim Zia, Tanzeel Areeb and Azeem Ullah, "Development and characterization of Novel antimicrobial fibers for woundcare applications", AMPE-2015, Venue: NED, Karachi, (2015)

46

Tanzeel Areeb, Rashid Masood, Tanveer Hussain, Azeem Ullah, and Muhammad Umar, "Synthesis of turmeric loaded alginate-psyllium (TAP) hybrid fibers for woundcare application", ISAM-2015, Venue: NCP, Quaid e Azam University, Islamabad, (2015)

47

Muhammad Maqsood, "Development of bi-stretch woven fabrics for compression garments", MedTex, Venue: Lodz Poland, (2015)

48

A. Afzal, N. Khenoussi, S. Ahmad, J.Y. Drean, N.A. Akhtar, "Development of composite technical filament for smart applications", The 13th Asian Textile Conference, Venue: Geelong, Victoria, Australia, (2015)

49

Hafsa Jamshaid ,R. Mishra, "Performance utility of novel basalt woven hybrid fabrics", , 6th international Technical Textile congress, Venue: Izmir,Turkey, (2015)

50

Hafsa Jamshaid ,R. Mishra, "Bio-based composite materials", Keynote lecture, International conference, CET, Venue: Bhubaneswar, (2015)

51

Hafsa Jamshaid, R. Mishra, " Basalt based hybrid woven stuctures and composites", Keynote lecture, INNOTEX-International conference, JNGEC, Venue: Sundernagar, Himachalpradesh, (2015)

52

Hafsa Jamshaid, Rajesh Mishra, "Thermal and Mechanical Characterization of Basalt Hybrid Structures", 15th AUTEX world Textile conference , Venue: ----, (2015)

53

19. Hafsa Jamshaid, Rajesh Mishra, "Thermo-Mechanical Characteristics of Hybrid Woven Structures", Clotech , Venue: ---, (2015)

54

Hafsa Jamshaid, Rajesh Mishra, "Mechanical & Functional Characterization Of Unconventail Knitted Fabrics", 5 th SMARTEX , Venue: Egypt, (2015)

55

Hafsa Jamshaid, Rajesh Mishra, "Analysis if basalt fabrics: thermal and mechanical analysis", Svetlanka , Venue: ---, (2015)

56

Zuhaib Ahmad, Brigita Kolčavov Sirkov and Moaz Eldeeb, "Influence of weft setting on shape of yarn cross section in woven fabrics", Světlanka Workshop, Venue: Rokytnice nad Jizerou, Světlanka, Czech Republic, (2015)

57

A. Afzal, S. Hussain, "Comparison of moisture management properties of single and plied weft yarns of plain weaved fabric", 1st International Young Engineers Convention (IYEC), Venue: Lahore, Pakistan, (2014)

58

A. Rasheed, I. Akhtar, F. Iftikhar, A. Afzal, "Modelling of sewing thread consumption for stitch class 301", International Young Engineers Convention (IYEC), Venue: Lahore, Pakistan, (2014)

59

A. Afzal, S. Hussain, "Comparison of thermo-physiological comfort properties of single and plied weft yarns of plain weaved fabric", 5th International Conference of Textile and Clothing, Venue: Lahore, Pakistan, (2014)

60

Khubab Shaker, Muhammad Usman Javed, Yasir Nawab, Muhammad Umair, Muhammad Maqsood, Adeel Zulfiqar, Danish Mehmood Baitab, "Development of textile pressure sensors using multilayer interlock woven fabrics", 14th AutexWorld Textile Conference, Venue: Bursa-Turkey, (2014)

61

Muhammad Umair, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, Adeel Zulfiqar, Danish Mehmood Baitab, "To study the effect of loom parameters to optimize the woven fabric width using Taguchi approach", 14th AutexWorld Textile Conference, Venue: Bursa-Turkey, (2014)

62

Muhammad Maqsood, Tanveer Hussain, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Prediction of warp and weft yarn crimp in cotton woven fabrics", 14th AutexWorld Textile Conference, Venue: Bursa-Turkey, (2014)

63

Muhammad Maqsood, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Prediction of crimp % for warp and weft yarns in cotton woven fabrics", First International Young Engineers Convention, Venue: Lahore-Pakistan, (2014)

64

Muhammad Umair, Yasir Nawab, Khubab Shaker, Muhammad Maqsood, "3D shaped woven structures for structural composite applications", First International Young Engineers Convention, Venue: Lahore-Pakistan, (2014)

65

Khubab Shaker, Yasir Nawab, Muhammad Umair, Adeel Zulfiqar, Muhammad Maqsood, Danish Mehmood Baitab, "Finite Element Modelling of Resin Flow in Woven Reinforcement for Composites Using Resin Transfer Moulding", First International Young Engineers Convention, Venue: Lahore-Pakistan, (2014)

66

Sheraz Ahmad, Irfan Akhtar, Abher Rasheed, N. Ahmad, "An Approach to fabric drape measurement: Design and development of a digital drape meter ", 1st International Young Engineers Convention, Venue: University of Engineering & Technology Lahore, (2014)

67

Fatime Iftikhar, Muhammad Hadi, Sheraz Ahmad, Faheem Ahmad, "Combined effect of seams and stitches on seam strength and drape of woven garments ", 1st International Young Engineers Convention, Venue: University of Engineering & Technology Lahore, (2014)

68

Hafsa Jamshaid, Rajesh Mishra, "Thermal and mechnical properties of woven Basalt fabric reinforced hybrid & non-hybrid composites", 6th International Istanbul conference on Future Technical textiles(FTT2014) , Venue: -----, (2014)

69

Hafsa Jamshaid, Rajesh Mishra, "Thermal And Mechanical Properties Of Novel Basalt Woven Structures", 20th International conference STRUTEX , Venue: ----, (2014)

70

Zuhaib Ahmad, Imran Nazir, Syed Ibrahim, Shoaib Iqbal. Muhammad Salman Naeem, "Effect of weave design on comfort properties of fabric made from Bamboo yarn", STRUTEX, Venue: Technical University of Liberec, Liberec, Czech Republic, (2014)

71

A. Afzal, T. Hussain, H. Malik, A. Nazir, F. Ahmad, "Influence of fabric parameters on thermal comfort performance of double layer knitted interlock fabrics", The 12th Asian Textile Conference, Venue: Shanghai, China, (2013)

72

Hafsa Jamshaid, Mohnapryia Vankataraman, Rajesh Mishr, "Effect of temperature on mechanical properties of polymer fibers", Textile Science Conference , Venue: Liberec, Czech Republic, (2013)

73

Sheraz Ahmad, Gerald Barbier, Artan Sinoimeri, Christian Pidancier , "An Approach of Fibre To Fibre Friction Measurement: Modified and Improved Static Friction Tester", ITMC-Intelligent Textiles & Mass Customization,, Venue: Casablanca & Marrakesh, Morocco., (2011)

74

Sheraz Ahmad, Artan Sinoimeri , "Effect of Fibre Hooks and Crimp on Fibre to Fibre Friction of Cotton", International Conference on Textile and Clothing-3, Venue: University of Management & Technology Lahore Pakistan, (2011)

75

Hafsa Jamshaid, "Accessing supply risk associated with textile industry ", The Textile Institute Centenary conference, Venue: Manchester, UK, (2011)

76

Hafsa Jamshaid ,Zafar Javeed , "Prospects of SPF in Pakistan", Fiber Med 11 , Venue: Tampre,Finland, (2011)

77

Hafsa Jamshaid , "Geotextile past, present and future in Pakistan", 3rd international conference on textile & clothing, Venue: Lahore,Pakistan, (2011)

78

Sheraz Ahmad Artan Sinoimeri , "Effect of Fibre Surface Properties on Inter-fibre Friction of Cotton", 10th world textile conference AUTEX 2010, Venue: Vilnius Lithuania., (2010)

79

Hafsa Jamshaid/Riaz , "Total Quality Management: Use of Kaizen in Textile mill", World Engineering Congress (Conference on Manufacturing Technology and Management ), Venue: Malaysia, (2010)

80

Hafsa Jamshaid/Riaz, "Actions for women education and career development in Pakistan", TWOWS Fourth General Assembly and International Conference, Venue: Beijing, China, (2010)

81

Hafsa Jamshaid, " Occupational Health & Safety ", 7th National seminar, Venue: Karachi,Pakistan , (2010)

82

Hafsa Jamshaid/Riaz, " WTO & its impact on Pakistan Textile Industry", 4th International conference on Statistical sciences, Venue: Gujrat, Pakistan, (2008)

Major Apparatus & Equipments
  • Fibro Graph
  • Fineness Tester
  • Pressley & Stelo meter strength tester
  • Shirley Analyzer
  • Yarn Testing
  • Wrapping Reel
  • Auto Sorter
  • Twist Tester
  • Lea Strength Tester
  • Tensorapid
  • Hairiness Tester
  • Classimate-II
  • Tensile Strength Tester
  • Elmendorf’s Tear Tester
  • Universal Textile Abrasion Tester
  • I.C.I Pilling Box Tester
  • Abrasion Tester (Martindale)
  • Cloth Density Tester
  • Stiffness Tester
  • Crease Recovery Tester
  • Circular Cutter for G.S.M
  • Hygrometer
  • Moisture Meter
  • Microscopes
  • Sample Dryer
Contact Name: Dr. Sheraz Ahmad
Position: Assistant Professor / Chairman
Contact Telephone: +92-41-9230081-90 Ext: 108
Contact Fax: +92 (41) 9230098
Office Address: Department of Materials and Testing, National Textile University , Faisalabad-37610, Pakistan
Email chairmandmt@ntu.edu.pk